Sea & Sea

Sea & Sea MDX-70D Underwater Housing for Canon EOS 70d

  • Sale
  • Regular price $ 2,999.95


Features
  • Optical YS Converter/C can be built into the housing   
    Compatible with new Optical YS Converter/C1 for MDX housing which converts the camera’s hot-shoeTTL signal to a light signal. Both TTL and manual strobe modes can be used and controlled from the housing using a Fiber-Optic Cable II.  
    * Fiber-Optic Cable ll is required when using the Optical YS Converter.  

    TTL mode shown by blue light . (simulated image)

    Manual mode shown by green light. (simulated image)
  • Compatible with both the VF180 1.2x and VF45 1.2x viewfinders
    By attaching the VF180 (#46112) or the VF45 prism viewfinders (#46111) (magnification ratio of 1.2x) to the housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

    With the VF45 1.2x mounted
  • Port can be replaced without opening the housing
    Port lock can now be activated from outside the housing. The housing is also equipped with a "lens-lock release" button which allows the lens to be replaced without opening the housing. The port lock can also be activated from inside like previous SEA&SEA housings.
  • The multi selector (which is often used underwater) is the same design as the camera control and can be operated in eight directions in the same way
     The multi selector is located on the very right hand side of the rear case so that it is easily accessible and operated with your hand on the grip.
MDX-70D Other Features
  • Equipped with two fiber-optic cable sockets. With the camera's built-in flash raised and fiber-optic cables fitted, external strobes can be triggered as "slave units" by the built-in flash.
  • Every detail of the housing is precision machined. The housing is protected by a highly corrosion resistant coating. All edges have been polished carefully for a perfect finish.
  • Controls all the Canon EOS 70D essential functions underwater. (Depth-of-field preview button and LCD panel illumination button are not operable from the housing).
  • The camera's built-in flash can be activated and deactivated from the housing. (When the accessory light-shielding plate is fixed, this function cannot be used).
  • Equipped with Accessory Port which can be used for HDMI output.
  • The shutter release lever tension can be adjusted in 2 steps with a spring.
  • Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to avoid electrolysis damage.
    Sacrificial Zinc Anode (2 pieces)46116
  • The grips have been designed with the travelling diver in mind. They are mounted with threadless fixing to facilitate easy removal, transportation and mounting. The new design also alleviates corrosion build up around the fittings. All fixing are available as spare parts.
  • Fitted with a tripod socket on the center underside of the housing.
  • Equipped with the Optical Viewfinder 0.5x as standard. Other (optional) interchangeable viewfinders can be used.
  • The quick shoe makes the camera easy to install and remove from the housing.
  • Built-in leak sensor immediately alerts you to water ingress.
  • Depth rating of 100m / 330ft makes the housing ideal for tech diving.