XS Scuba

Faber Twin Steel Cylinder Sets

  • Sale
  • Regular price $ 1,135.00


Twin sets come complete with your choice of isolation manifold, stainless steel bands with hardware, and self-draining tank boots. 

Faber Steel Cylinder Features: 

  • 5 HP models available: 80, 100, 120, 117, or 133.
  • Triple coated gray finish or hot dipped galvanized 
  • D.O.T and T.C. approved
  • Includes self-draining tank boots 

Thermo Isolation Manifold - DIN Features:

  • DIN - Dedicated 300 bar
  • Center-to-center distance: 215 mm (8.46”) +/- 5 mm (0.2”)
  • 3/4”-14 NPSM standard inlet threads
  • High gas flow for optimum regulator performance
  • On/Off seat built from high strength brass with nylon seat and Teflon® plated for years of smooth operation
  • One-piece safety assembly protected within the body of the valve
  • Traditional copper crush washer sealed bonnet
  • Modular access plugs (R/L) included for use as single valves
  • Screw-in dip tube with hex tighten feature
  • Meets the requirements of CGA V9-2009 standards

Thermo Isolation Manifold - PRO Features: 

  • PRO - DIN/Yoke with removable spin-out insert
  • Center-to-center distance: 215 mm (8.46”) +/- 5 mm (0.2”)
  • 3/4”-14 NPSM standard inlet threads
  • High gas flow for optimum regulator performance
  • On/Off seat built from high strength brass with nylon seat and Teflon® plated for years of smooth operation
  • One-piece safety assembly protected within the body of the valve
  • Traditional copper crush washer sealed bonnet
  • Modular access plugs (R/L) included for use as single valves
  • Screw-in dip tube with hex tighten feature
  • Meets the requirements of CGA V9-2009 standards

Isolation PRO Manifold Features: 

  • PRO - DIN/Yoke with removable spin-out insert
  • XS Scuba Safety Handwheel - Know at a glance that your valve is 100% open
  • 1.5 rotations of the handwheel from fully on to fully off
  • Center-to-center distance: 215 mm (8.46”) +/- 5 mm (0.2”)
  • 3/4”-14 NPSM standard inlet threads
  • On/Off seat built from high strength brass with nylon seat and Teflon® plated for years of smooth operation
  • One-piece safety assembly protected within the body of the valve
  • O-ring sealed bonnet
  • Modular access plugs (R/L) included for use as single valves
  • Screw-in dip tube with hex wrench tighten feature
  • Meets the requirements of CGA V9-2009 standards

Highland Steel Band Features: 

  • 304 stainless with all hardware included 
  • 2.5" wide bands on all sizes of cylinders 

 

Download Manifold Assembly Instructions
Download Assembling Twin Cylinders

*Both set ups shown with Thermo manifold.